Thin, but not soft
A honeycomb panel is two aluminium skins bonded to a hexagonal aluminium core. The core is 3003 foil, bonded with adhesive film under heat and pressure, with peel strength tested to project requirements.
At equal stiffness it weighs about a third of solid veneer, so panels can be very large without sagging — used on supertall towers, long canopies and anywhere flatness is critical.
Standard specifications
| Item | Specification |
|---|---|
| Build-up | Face + honeycomb core + back skin |
| Overall thickness | 10 / 15 / 20 / 25 mm |
| Skin | 0.8 / 1.0 mm |
| Max panel | 1500 × 6000 mm |
| Weight | approx. 5.5–7.5 kg/m² |
| Finish | PVDF / wood grain / stone grain |
Factory and site
Photos of the same systems in our factory and on site, showing how they are actually made and used.
Key details
The details that decide whether it installs well and still sits flat in three years.
- 01
Very flat
Continuous core support — large panels stay flat.
- 02
Light
Roughly one third of solid veneer at equal stiffness.
- 03
Stiff
High flexural rigidity, minimal wind deflection.
- 04
Insulating
The core cavity provides some thermal resistance.
Tell us about your project
Send elevations, technical requirements or renders — our engineers reply with shop drawings, samples and a quotation.